Clear, indicative 2026 price ranges for soundproofing, acoustic panels and acoustic consulting in Mumbai — and what actually drives the cost.
In Mumbai (2026): soundproofing walls/ceilings ₹250–₹650 per sq ft, acoustic panels ₹450–₹2,500 per sq ft by type, and acoustic consulting ₹15,000–₹2,00,000 by scope. Mumbai pricing tends toward the upper end of the ranges below because of higher labour, logistics and access constraints in tall, dense buildings.
Supply and install, exclusive of GST. Final pricing follows an on-site measurement in Mumbai.
| Scope | Indicative cost (2026) |
|---|---|
| Noise & RT60 site assessment per visit, includes report | ₹15,000 – ₹45,000 |
| Room acoustic design + BOQ depends on room count & complexity | ₹40,000 – ₹2,00,000 |
| Turnkey design + supervision quoted as a share of works | Project-based |
Indicative ranges for budgeting only, exclusive of GST. Final pricing follows an on-site measurement.
| Scope | Indicative cost (2026) |
|---|---|
| Wall / ceiling soundproofing resilient channel + double board + insulation | ₹250 – ₹650 / sq ft |
| Acoustic door set per door, by STC rating & size | ₹35,000 – ₹1,20,000 |
| Window soundproofing (secondary glazing) by glass spec & frame | ₹900 – ₹2,200 / sq ft |
Indicative ranges for budgeting only, exclusive of GST. Final pricing follows an on-site measurement.
| Scope | Indicative cost (2026) |
|---|---|
| Polyester / felt panels supply + install | ₹450 – ₹900 / sq ft |
| Fabric-wrapped acoustic panels supply + install | ₹800 – ₹1,400 / sq ft |
| Wooden slat / designer panels supply + install | ₹1,400 – ₹2,500 / sq ft |
Indicative ranges for budgeting only, exclusive of GST. Final pricing follows an on-site measurement.
Mumbai is India's densest metro, where apartments are compact, real estate is at a premium, and ambient plus neighbour noise is high. It is also the home of Bollywood and a huge media industry, so demand spans tiny premium home theaters and professional studios that must isolate sound in tight, shared buildings.
Mumbai pricing tends toward the upper end of the ranges below because of higher labour, logistics and access constraints in tall, dense buildings.
A higher STC (isolation) or lower RT60 (less echo) needs more mass, decoupling or absorption — which raises cost. We set a realistic target for your use case.
High floors, restricted work hours and premium finishes (wood slat, printed fabric) add to labour and material cost.
In Mumbai, wall and ceiling soundproofing is typically ₹250–₹650 per sq ft (resilient channel, double board and insulation), acoustic door sets run ₹35,000–₹1,20,000 each, and secondary glazing for windows is around ₹900–₹2,200 per sq ft. Mumbai pricing tends toward the upper end of the ranges below because of higher labour, logistics and access constraints in tall, dense buildings.
Polyester and felt panels are about ₹450–₹900 per sq ft, fabric-wrapped acoustic panels ₹800–₹1,400 per sq ft, and wooden slat or designer panels ₹1,400–₹2,500 per sq ft, supplied and installed.
A noise and RT60 site assessment is usually ₹15,000–₹45,000, a full room design with bill of materials ₹40,000–₹2,00,000 depending on complexity, and turnkey design with supervision is quoted as a share of the works.
Most absorption and isolation cost scales with treated area and the spec needed to hit your NRC or STC target. We measure first so you only treat the surfaces that matter, which keeps the total in check.
We cover Mumbai and the MMR including Bandra, Andheri, Powai, Lower Parel, Goregaon, Juhu, Worli, Malad, Thane and Navi Mumbai.
Yes. In compact flats we focus on the biggest wins — windows facing the road, the shared wall and the door — so you gain real quiet without losing precious floor area.
Acoustic consulting, soundproofing and acoustic panels across Bangalore, Hyderabad, Mumbai and Chennai.
Share your room details and we will turn these ranges into a precise, measured quote for your space in Mumbai.